Outdoor infrared illuminator 3N-130/60S2 is designed to improve night vision in video surveillance. A wide ~60° beam angle illuminates up to ~130 m (depending on the camera sensor, optics and conditions), providing a quality image in the dark.
- ~130 m IR operating range for a large area.
- ~60° beam angle — suitable for yards and parking lots.
- 850 nm IR (typical) – effective with most CCTV cameras.
- Outdoor housing with IP66 protection, adjustable bracket.
- Compatible with IP/TVI/CVI/AHD cameras with IR-cut.
Technical specification
| Model / MPN | 3N-130/60S2 |
|---|---|
| IR wavelength | 850 nm (typical; 940 nm versions – depending on the series) |
| IR range | up to ~130 m (depends on the environment and camera sensitivity) |
| Beam angle | ~60° |
| Power supply | 12 V DC (or 24 V AC/DC — depends on the configuration) |
| Consumption | typically 10–20 W (see the datasheet of the specific batch) |
| Class of protection | IP66, outdoor housing with bracket |
| Operating temperature | approx. −30…+50 °C |
| Housing | Metal (aluminium), glass front cover |
| Compatibility | CCTV cameras with IR-cut filter (IP/TVI/CVI/AHD) |
| Warranty | 2 years |
Where is it useful?
- For yards and driveways — wide, even IR light.
- For parking lots — improves the visibility of license plates and silhouettes at night.
- For perimeter surveillance — consistent illumination without “hot spots”.
- For warehouses and production in outdoor areas — reliable recording of motion events.
Installation recommendations
- Place the IR illuminator at a similar height/angle as the camera to reduce shadows and glare.
- Avoid shining directly at reflective surfaces (windows, nearby license plates).
- Choose a power supply with a power reserve (≥20%).
- For outdoor installation, seal the cable entry against moisture (to maintain IP66).
FAQ
Is 850 nm visible?
850 nm produces a slight “red dot” on the LED; if completely invisible operation is needed, use the 940 nm version (with lower operating efficiency).
Does the illuminator work with any IP camera?
Yes, if the camera has IR-cut and responds to the near-IR spectrum.
Is a separate power supply required?
Yes, use a suitable 12 V DC or 24 V AC/DC PSU (see the specification of the specific batch).
Can it be installed on poles or walls?
Yes, the bracket included in the kit allows adjusting the angle and mounting on various surfaces.
Did you know?
- To avoid the fog effect, do not place the IR illuminator too close to a camera with a dome glass.
- By matching the beam angle to the camera FOV, a more even night frame is obtained.
- 940 nm IR is completely invisible to the human eye, but often with a shorter effective range.







