Professional soldering flux AG TermoPasty RF800 (AGT-042), intended for electronics assembly and SMD/TH soldering. Provides excellent wetting, oxide removal and a clean solder joint without the risk of corrosion.
- Universal RF800 formula — designed for both classic and SMD soldering.
- Active oxide removal — improves solder flow and adhesion.
- Non-corrosive — safe for electronic components and PCBs.
- Also suitable for reflow (rework/repair).
Technical specification
| Model / MPN | AGT-042 / RF800 |
|---|---|
| Type | Active electronics soldering flux (flux preparation) |
| Volume | — (AGT-042 — solid flux mixture) |
| Melting temperature | ~65–85 °C |
| Flux type | RF800 — non-corrosive, active |
| Application | SMD, THT, repair work, reflow |
| Oxide removal | Yes, actively cleans PCBs and contacts |
| Cleaning | Usually not required; optionally isopropanol |
| Manufacturer | AG TermoPasty |
| Warranty | 2 years |
| EAN | 5901764320425 |
Where is it useful?
- For soldering and reflowing SMD components.
- For servicing electronic modules, chips, connectors.
- For restoring oxidised contacts before soldering.
- Suitable for both professional and home workshops.
Installation recommendations
- Use a small amount of flux — RF800 is very active.
- Degrease the surface before soldering for maximum wetting.
- Do not overheat — optimal 250–360 °C depending on the soldering iron.
- After work, if necessary, clean with isopropanol.
FAQ
Is RF800 an aggressive flux?
No — it is active, but non-corrosive and safe for electronics applications.
Is washing necessary?
Usually not; however, if a completely clean surface is required, IPA (isopropanol) can be used.
Is it suitable for SMD repair?
Yes — RF800 is one of the standard fluxes for microelectronics work.
Did you know?
- RF800 is one of the most popular fluxes in electronics repair in Europe.
- The flux improves solder wetting by up to 30%.
- The composition of AG TermoPasty RF800 is designed to leave no corrosive residues.



