Gembird PP12-POE-0.15M-W is a passive PoE adapter kit (injector + splitter) that lets you combine power and data transmission over a single Ethernet cable. Suitable for IP cameras, network devices and situations where no PoE switch is available.
- Plug & Play — no configuration required.
- 0.15 m length — convenient connection in tight spaces.
- RJ45 + DC 5.5/2.1 — universal compatibility with network devices.
Technical specification
| Model / MPN | PP12-POE-0.15M-W |
|---|---|
| Type | Passive PoE adapter cable kit (injector + splitter) |
| Length | 0.15 m |
| Connections | RJ45 + DC power connector 5.5/2.1 mm |
| Power input | 12–48 V DC (depending on the connected device) |
| Maximum current | Up to ~1 A (depends on the external adapter) |
| Pin-out (PoE) | 4–5: V+, 7–8: V- (passive PoE) |
| Cable diameter | ~5.3 mm |
| Conductor | AWG24 copper |
| Weight | ~54.7 g |
| Colour | White |
| Manufacturer | Gembird / OEM Cablexpert |
| EAN | 8716309087292 |
| Warranty | 2 years |
Where is it useful?
- For IP cameras without PoE power.
- For Wi-Fi access points in temporary installations.
- For network devices with a separate DC power supply.
- For places where there is no power outlet nearby.
Installation recommendations
- Make sure the DC voltage is correct before connecting the device.
- Do not connect passive PoE to an active 802.3af/at PoE switch.
- Avoid excessively long UTP lines to reduce voltage drop.
- Check the connection before final installation.
FAQ
Does the kit work without a PoE switch?
Yes, it is a passive PoE solution with an external DC adapter (not included).
Is it safe for IP cameras?
Yes, if the DC voltage matches the camera's requirements.
Does it work with 802.3af/at?
No — this kit is not an active PoE solution.
How far can power be transmitted?
Usually 20–30 m, depending on the load and cable quality.
Did you know?
- Passive PoE is popular in small IP camera systems.
- The DC 5.5/2.1 mm connector is the de facto industry standard for small network devices.
- 0.15 m adapters reduce signal and power losses at the device.





