ProBase 2×4 mm² professional speaker cable is designed for high-quality sound transmission in audio systems, home theaters and commercial installations.
Two 4 mm² conductors ensure low signal loss and the cleanest possible sound over long distances.
- 2×4 mm² — large cross section, suitable for higher power.
- OFC (oxygen-free copper) — lower resistance and higher quality.
- Flexible insulation for easy installation in walls, ducts or equipment.
- Suitable for Hi-Fi, home theater, professional audio installations.
Technical specification
| Model / MPN | ProBase 2×4 mm² |
|---|---|
| Number of strands | 2 conductors |
| Conductor cross section | 4 mm² each |
| Material | OFC oxygen-free copper |
| Durability | Low resistance, low signal loss |
| Insulation | PVC, colour marking (+/-) |
| Rated voltage | Up to 300/500 V |
| Temperature range | −20…+70 °C |
| Coil / packaging | 100 m (typical coil) |
| Application | For speakers, amplifiers, audio installations |
| Warranty | 2 years |
Where is it useful?
- For deep and powerful speakers and subwoofers.
- Home theaters and Hi-Fi systems.
- Commercial audio installations (restaurants, offices, halls).
- For long cable runs where a large cross section is needed.
Installation recommendations
- Connect the cable conductors firmly, using quality terminals.
- Do not run the speaker cable together with 230 V lines.
- On long runs use a larger cross section to reduce losses.
- Check the polarity (+/-) before connecting to the amplifier.
FAQ
Is OFC really different from ordinary copper?
Yes — OFC is purer, has lower resistance and oxidises less.
Can it be used for long runs?
Yes — 4 mm² is well suited for long distances and powerful speakers.
Is the cable flexible?
Yes — PVC insulation makes pulling and bending easy.
Did you know?
- The larger the cross section (mm²), the lower the signal loss over long distances.
- Oxygen-free copper preserves sound quality for many years without oxidation.
- Correct polarity (+/-) noticeably improves the spatial quality of the sound.

