Skip to content
Delivery across the Baltics +371 27017034info@goodstore.lv
EN LVRUENLTET
Catalogue
Solar Panel Controllers

Solar charge controller SCC-40A-PWM-LCD-M2

Solar photovoltaic panels are a clean and environmentally friendly source of electricity.

However, obtaining this energy poses a number of problems for device designers.

The amount of energy produced by the panel strongly depends on the angle and intensity with which light falls on the solar cells.

This, in turn, makes the output power supply parameters unstable, as shading even a small part of the panel can drastically reduce its efficiency.

The optimal solution to the problems mentioned above is to use a set consisting of a photovoltaic panel, a battery and a charge controller.

Such a set makes it possible to provide loads with constant power supply parameters, as well as to store excess energy produced for later use.

Panels wired together both in series and in parallel can be connected to the SCC-40A-PWM-LCD-M2 solar charge controller; bear in mind that the permissible current and voltage values at the device input must not be exceeded.

Solar charge controllers are adapted to work with photovoltaic panels. Do not use them with other power sources.

Regulation type: PWM
Rated voltage: 12 / 24 / 36 / 48 / 60 V
Rated current: 40 A
Weight: 0.3 kg

Regulation type: PWM
Rated voltage: 12 / 24 / 36 / 48 / 60 V
Rated current: 40 A
Permitted voltage range: max. 18 V 12 V akumulatoram – Augstākā darba sprieguma diapazons paneļu komplektam, kas savienots ar vienu regulatora ieeju
max. 36 V 24 V akumulatoram – Augstākā darba sprieguma diapazons paneļu komplektam, kas savienots ar vienu regulatora ieeju
max. 54 V 36 V akumulatoram – Augstākā darba sprieguma diapazons paneļu komplektam, kas savienots ar vienu regulatora ieeju
max. 72 V 48 V akumulatoram – Augstākā darba sprieguma diapazons paneļu komplektam, kas savienots ar vienu regulatora ieeju
max. 90 V 60 V akumulatoram – Augstākā darba sprieguma diapazons paneļu komplektam, kas savienots ar vienu regulatora ieeju
Battery charging current: max. 40 A
Load current: max. 20 A
Output voltage:
  • Equal to the voltage at the battery terminals – Cable terminals,
  • 5V DC – USB sockets
  • Selected characteristics:
  • The device is intended only for charging AGM and gel batteries,
  • LCD display,
  • 2 x Ligzda USB – Strāvas izeja
  • Weight: 0.3 kg
    Size: 169  x 94  x 40 mm
    Warranty: 2 years

    Additional information

    Weight 0,344 kg
    Dimensions 17,5 × 10 × 4,6 cm
    0
    Shopping cart
    Shopping cart is emptyReturn to Shop