NICE WALKY 2024 MyGO kit for swing gates
The set includes:
- 1 pc. WL1024C – swing gate operator with a built-in WLA1 BlueBUS control unit
- 1 pc. WL1024 – swing gate operator
- 2 pcs MyGO4 remotes
- 1 pc OXIBD radio receiver
- 1 pc WLT warning light (12 V)
- 1 set of EPMB photocells
- Mounting elements
- Original packaging
- Instructions in Polish
Application
Recommended for wooden or PVC gates. The maximum leaf width is 180cm and the maximum leaf weight is 100kg. Overall, the kit is designed for gates with an opening of up to 360cm and a total weight of both leaves of up to 200kg.
Ideal for gates even on small posts (width 10 cm). Smooth and precise movement makes it possible to automate lightweight gates too.
WALKY 2024 ERA FLOR is compatible with the OPERA and SOLEMYO systems
- BLUEBUS: the system allows peripheral devices to be connected with a 2-wire cable, LEDs show the active functions.
- Fast: the operator needs only 7 seconds to open or close the gate (under ideal installation conditions).
- Convenient installation: the operator bracket can be rotated to make installation easier even on less massive posts.
- Can be installed in a very narrow corner (min. 80 mm).
- Zawsze pracuje: with the PS424 battery (optional), the operators will open and close the gate even during a power cut.
- Smart functions: during programming the operator automatically memorises the gate end positions (automatic programming).
- Bezpieczny: continuous monitoring of connected devices; the flashing light indicates system malfunctions and the number of flashes shows the type of error (self-diagnostics); obstacle detection by overload; soft start when opening and slowdown when closing.
- Socket for OXI, SMXI, SMXIS type radio receivers.
- BLUEBUS photocells
WLA1 modular control unit
- 4 speeds
- automatic closing with a delay
- partial opening function
- regulacja czasu pauzy
- adjustable sensitivity level
- automatic recognition of NO/NC/8.2 kOhm safety devices
- Socket for SM, OXIBD type radio receivers
EPMB photocells
ERA family photocells for surface mounting combine excellent technical parameters with great design. Range up to 30 m.
In addition, the model features modern BlueBus technology – it connects to the control unit with a 2-wire cable, which makes installation much easier and quicker.
When installing a second line of photocells inside the property, which significantly improves the safety of using swing gates, attractive 50 cm or 100 cm high aluminium columns can be used.
WLT warning light, 12 V power, LED, with twilight sensor.
The WLT flashing light with several very bright LEDs does more than just warn. It can be used as a classic flashing light or as a device independent of the operator – then the lamp illuminates the immediate surroundings of the gate.
With the built-in twilight sensor it can be programmed to switch on when the daylight level drops below a factory-set threshold. The lamp's light element can be set in two ways: to shine in all directions or to direct the light beam to illuminate the driveway.
Connected to any 12/24V (DC or AC) source, the WLT lamp shines continuously, while connected to a control unit with the BLUEBUS system it flashes and acts as a warning light.
Technical data:
Gate leaf dimensions and parameters:
ATTENTION!
Gate drives, like all products that NOT fitted with a plug, require changes to the building’s wiring – by law they may only be installed by a qualified installer, holding the appropriate licence.
