Skip to content
Delivery across the Baltics +371 27017034info@goodstore.lv
EN LVRUENLTET
Catalogue
Gate automation
NICE Kit

Nice Wingo 2024 swing gate automation kit, 24 V, without photocells

Frequently bought together

Based on orders
Total:

Nice Wingo 2024 kit for double-leaf swing gates, 24 V

The kit is designed for medium-sized double-leaf swing gates: each leaf up to 2 m long and up to 200 kg (up to 100 kg recommended), with a total gate width of up to 4 m. Photocells are not included. For safety and convenience, the kit can be extended with photocells (one or two lines), a warning lamp and an antenna that increases the remote control range.

Package contents

  • 2 self-locking electromechanical operators Nice Wingo 2024, 24 V
  • MC424LR10 control unit with a built-in radio receiver, in a sealed housing
  • 2 two-channel Nice ON2E remote controls with rolling code
  • Release keys

Key features

  • Self-locking operators: after stopping, the gate stays mechanically locked, so no extra lock is needed.
  • Manual release with a key: the gate can be opened and closed by hand during a power cut or a fault.
  • Obstacle detection by motor current: when the gate meets an obstacle, the operator stops it and reverses the direction.
  • Soft start and slowdown before the end position: the gate moves smoothly and quietly.
  • Pedestrian mode: partial opening so you can walk or cycle through without waiting for the gate to open fully.
  • Automatic closing with a programmable pause time.
  • Photo test: before each movement, the control unit checks the connected photocells.
  • An 8.2 kΩ resistive safety edge and an electric lock can be connected.
  • With the optional PS124 battery (sold separately), the gate also works during a power cut.

Control unit MC424LR10

  • Built-in multi-system radio receiver with memory for up to 100 remote controls.
  • Slot for SM-type plug-in receivers.
  • Programming logic as in BlueBUS control units, two-level programming.
  • Fault self-diagnostics via the warning lamp.
  • An O-View programmer can be connected.
  • Compatible with the Solemyo solar power system.

Nice Wingo 2024

Technical specification

  • Control unit / motor power supply: 230 V / 24 V
  • Rated power per motor: 50 W
  • Rated current per motor: 2 A
  • Linear speed: 0.013 m/s
  • Duty cycle: 300 cycles per day
  • Operating temperature: −20 to +50 °C
  • Operator protection class: IP44
  • Weight per operator: 5 kg
  • Maximum leaf length: 2m
  • Maximum leaf weight: 200 kg
  • Operator dimensions: 770 × 98 × 95 mm

ATTENTION!

Gate operators have no mains plug: they are wired into the building's electrical installation, so under the regulations they may only be installed by a qualified professional with the appropriate permits.

Additional information

Weight 10 kg
0
Shopping cart
Shopping cart is emptyReturn to Shop