5-PORT POE SWITCH IP-5-11-M2
Set for 5 IP cameras, in external housing ABOX-M2, 96 W power supply, 6-port PoE switch 10/100 Mbps (5xPoE + 1xUplink), electronic fuses, long-range mode, type IP-5-11-M2
Goal
IP-5-11-M2 is a ready-made kit designed for IP CCTV systems, consisting of 5 IP cameras, for power supply. Electronic protection of PoE outputs ensures continuous operation of the entire system in the event of a short circuit or overload of individual power supply branches, as well as automatic voltage restoration after the fault is eliminated. “Long Range” mode allows you to increase the transmission range to 280 m using a standard UTP cable.
PoE Switch Kits are designed for use with IP cameras and other network devices powered by PoE 802.3at/af and PoE PASSIVE standards.
ABOX series outdoor enclosures provides a convenient solution for protecting devices and cable connections installed outdoors. High-quality plastic provides resistance to UV radiation and other adverse weather conditions. Available models are equipped with a mounting plate with a special 10.8 mm grid hole pattern. This is compatible with the mounting hole spacing of the built-in modules. This system solution allows you to mount selected devices vertically or horizontally in any pre-punched part of the mounting plate.
The set includes:
- 1x ABOX-M2 housing
- 1x APS-90-480-OF power supply
- 1x xPoE-6-11-OF switch
The most important functions and features:
- Ability to power 5 PoE 802.3at/af or PASSIVE receivers
- Data transmission capability up to 280 m (in long-range mode)
- Electronic fuse for each PoE channel separately (automatic return)
- Ability to turn off power on selected PoE ports
- Clear, optical indication of power and data transmission status
- Up to 70W power on LAN_5 PoE IN/OUT port
- Up to 40W of power on remaining PoE ports
- Simple and quick startup without the need to configure parameters
- High power module efficiency (>90%)
- Simple and fast installation service thanks to modular design
- Easy system expansion and scalability by adding additional xPoE IP and IPB series switches IPUPS
- modules can be installed in any perforated part of the mounting plate (raster system)
- possibility to store the cable inside the spare case
- cable entry through cable glands installed in the housing: 6xM16 and 1xM20
- 4 brackets included, allowing for enclosure assembly without violating IP56 protection class
Specification
| LAN ports | 6 RJ45 10/100Mbps ports (5xLAN+PoE, 1xUplink) |
| Supported PoE receivers (standard/maximum power) | 802.3af – up to 15.4 W LAN_1…LAN_5802.3at – up to 30 W LAN_1…LAN_5PoE PASSIVE – up to 70 W LAN_5 / up to 40 W LAN_1…LAN_4 |
| PoE outputs (standard/power mode) | LAN_1…LAN_5PoE PASSIVE, Mode B (4.5+) (7.8-) |
| PoE output protection (overload/short circuit) | LAN_1…LAN_40.75A / electronic (automatic return) |
| Microswitches SW1 | 1. switch “MODE” – switch operating mode |
| switches 2…6 “PoE ON/OFF” – PoE power supply on LAN_1…LAN_5 ports | |
| “Standard” operating mode | 1. switch “MODE” in OFFLAN_1…LAN_6 position — range up to 100 m (10/100 Mbps) |
| Long Range operating mode“ | 1. “MODE” switch in the ON position LAN_1…LAN_4 — range up to 280 m (10 Mbps) LAN_5…LAN_6 — range up to 100 m (10/100 Mbps) |
| Power supply (type) | switching SMPS / APS-90-480-OF |
| Power supply output protection (overload/short circuit) | 9 A, electronic (restart of the power supply may be required after a short circuit) |
| Power supply thermal protection | TSD (thermal shutdown) 130 °C, restart required |
| Power supply input voltage range/input protection | |
| 9 A, electronic (restart may be required after short circuit) Power supply) | 96W |
| Power supply efficiency | 92 % at 90W |
| Power supply output voltage (PoE camera power supply) | 48V +/-2 % |
| Housing assembly | wall-mounted, mounting brackets |
| Mounting the device inside the housing | system hole cutting 4.8 mm 10.8 mm raster format |
| Operating temperature range | -25°C…+40°C |
| Housing (type / material / color / cable glands) | ABOX-M2 / plastic / RAL7035 grey / 6 x M16 seals and 1xM20 |
| Dimensions / net weight / protection class | 190x140x70mm / 0.71kg / IP56 |
8mm
