>
Application
The video can be directly connected to the sp CDNVRau-I-DIN splitter at a distance of max. 70m (with the appropriate number of power supplies; with the appropriate system configuration, a longer distance can be achieved). The splitter also allows you to split the main bus into 4 outputs (using active outputs) and connect another splitter to the passive output. It also allows you to close the main bus (built-in video end jumper), and one of the active outputs is additionally amplified, which allows you to prevent video signal loss on long buses.
In addition, the splitter can be powered from the main bus or from an external 15 V power supply and has an additional screw output for connecting audio and power lines. It is designed for DIN rail mounting (occupies the width of 4 DIN modules) or surface mounting. They work with aco brand devices that work in both P systems, video and audio. >
| Description |
Active video splitter for digital systems mounted on a din rail |
| Design |
ABS body |
| dimensions (mm) |
91.1.1x71x59.2 (4 din. > Assembly method |
din rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
It also allows you to close the main bus (built-in video end jumper), and one of the active outputs is additionally amplified, which allows you to prevent video signal loss on long buses.
In addition, the splitter can be powered from the main bus or from an external 15 V power supply and has an additional screw output for connecting audio and power lines. It is designed for DIN rail mounting (occupies the width of 4 DIN modules) or surface mounting. They work with aco brand devices that work in both P systems, video and audio. >
| Description |
Active video splitter for digital systems mounted on a din rail |
| design |
ABS body |
| dimensions (mm) |
91,1,1,1x71x59.2 (4 din. > Assembly method |
din rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
It also allows you to close the main bus (built-in video end jumper), and one of the active outputs is additionally amplified, which allows you to prevent video signal loss on long buses.
In addition, the splitter can be powered from the main bus or from an external 15 V power supply and has an additional screw output for connecting audio and power lines. It is designed for DIN rail mounting (occupies the width of 4 DIN modules) or surface mounting. They work with aco brand devices that work in both P systems, video and audio. >
| Description |
Active video splitter for digital systems mounted on a din rail |
| Design |
ABS body |
| dimensions (mm) |
91.1.1x71x59.2 (4 din. > Assembly method |
din rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
In addition, the splitter can be powered from the main bus or an external 15V power supply and has an additional screw output for connecting audio and power lines.
It can be installed on the floor, at an installation collection point or at a busbar separation point. It is designed for DIN rail mounting (occupies the width of 4 DIN modules) or surface mounting. They work with aco brand devices that work in both P systems, video and audio. >
| Description |
Active video splitter for digital systems mounted on a din rail |
| Design |
ABS body |
| dimensions (mm) |
91.1.1x71x59.2 (4 din. > Assembly method |
din rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
In addition, the splitter can be powered from the main bus or an external 15V power supply and has an additional screw output for connecting audio and power lines.
It can be installed on the floor, at an installation collection point or at a busbar separation point. It is designed for DIN rail mounting (occupies the width of 4 DIN modules) or surface mounting. They work with aco brand devices that work in both P systems, video and audio. >
| Description |
Active video splitter for digital systems mounted on a din rail |
| design |
ABS body |
| dimensions (mm) |
91,1,1,1x71x59.2 (4 din. > Assembly method |
din rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
They work with aco brand devices that work in both P systems, video and audio. >
| Description |
Active video splitter for digital systems mounted on a din rail |
| Design |
ABS body |
| dimensions (mm) |
91.1.1x71x59.2 (4 din. > Assembly method |
din rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
They work with aco brand devices that work in both P systems, video and audio. >
| Description |
Active video splitter for digital systems mounted on a din rail |
| Design |
ABS body |
| dimensions (mm) |
91.1.1x71x59.2 (4 din. > Assembly method |
din rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
2 (4 DIN modules)
| Installation method |
DIN rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
2 (4 DIN modules)
| Installation method |
DIN rail or surface mounting |
| Installation type |
Digital: twisted pair cat. 5e or 6 |
| Power source |
15VDC / 60mA |
| Standby power consumption |
~0.9W |
| Exits |
| video td>– 4 x active outputs (amplifiers); max. load up to 0.7A |
| – 1 x passive output (without amplifier) |
| ARK screw connections: |
| – line signal connection (audio receivers) |
| 91.9INd.7 (4>
| 91.1x) inserts |
| RJ45 connector (bus: video, line, power): |
| – 1 x main entrance |
| ARK screw connections: |
| – additional power connection |
