Skip to main content

* The appearance of the product may differ from what is shown in the picture

ARAMID Z-XOTKtcdD 12J šķiedru kabelis – 500m

Preces kods: 12415K5

Piegādes laiks: 11-13 Martā

Estimated Delivery Dates

247,98 

Availability: 0

ARAMĪDA OPTISKAIS KABELIS Z-XOTKtcdD 12J — 500 m

https://gro-6-g. 12415K5/kabel_wiatowodowy_aramid_zxotktcdd_12j__500m_620b91339a1f7.jpg” alt=”Galvenās funkcijas:” loading=”slinks” />

<Light funkcijas: viencaurules konstrukcija(~20kg/km)
  • high elasticity and tensile strength despite the small diameter(~5.5mm)
  • gēla un ūdeni bloķējoša konstrukcija(WB)
  • HDPE coating
  • UVtemperatūras diapazons4 – 70°C

  • maksimālais instalācijas spriegums: 1200N
  • 500m sekcija
  • OPTIX aramīda konstrukcijaviensvars L-XOT-p> (~20kg/km), high elasticity and tensile strength despite the small diameter (~5.5mm), gel and water blocking construction (WB), HDPE coating, UV resistance, temperature range from -40°C to 70°C, reinforced with 2 ARP rods (ø 0.5mm) / F 0.5mm. Maximum installation voltage: 1200 N.

    Visām kabeļu šķiedrām ir krāsu kods saskaņā ar kodēšanas standartu eia/tia-598. Caurule satur līdz 24 optiskām šķiedrām un ir piepildīta ar hidrofobu gēlu, lai aizsargātu šķiedras no mitruma un vibrācijas. Kabelis ir pastiprināts ar aramid fibers. To provide additional structural strength, two ARP or FRP bars are embedded in the outer HDPE in the layer.

    Two threads embedded in the sheath facilitate the removal of the outer cable sheath. (ripcords) The cables are intended for installation in primary and secondary telecommunications ducts using pneumatic (blowing) and mechanical (pulling) methods. and overhead installations at distances up to 80 m.

    .eltrox.pl/zdjecia/12415K5/kabel_wiatowodowy_aramid_zxotktcdd_12j__500m_baa799ad50a9a.png” alt=”Apraksts” loading=”slinks” />

    s

    Specification

    Specification

    Additional information

    Kabeļa versija > >

    > fibers

    12 pcs. 1.4/2.0 (+/- 0.15)
    carrier element/circumference reinforcement aramid fibers
    reinforcing element arp (2×0.5)
    coating type and thickness HDPE 1.5 mm
    Temp. during installation -10°C ~ +50°C
    Temp. operations -40°C ~ +70°C
    Min. bending radius temporary / permanent 20D / 10D
    Max. cable tensile force (installation) 1200N
    Max. cable tension force (working) 600 N
    compression resistance 500 N (100 x 100 mm) 60 sec.
    Resistance to repeated bending 30 cycles,
    Svars 2,0000 kg
    0
    Shopping cart
    Shopping cart is emptyReturn to Shop