Each device has been tested in a Polish laboratory and has a certificate with a serial number!
Sensor lifespan — 10 years
7-year warranty
Carbon monoxide sensor CD-45A2 is used to continuously monitor the presence of carbon monoxide in the air and detect and warn if the safe concentration of this gas is exceeded.
The sensor uses technologically advanced electrochemical sensor and low power consumption.with electronic control system Dangerous carbon monoxide concentration in the air is detected, the device generates an acoustic and optical alarm and displays the concentration on the LCD screen.
The sensor is equipped with a test/restart button, battery life indicator, and sensor failure indication.
No additional devices or cables are required for proper operation, except DC and 1.bli are its small dimensions and easy installation – no screwdrivers, hammers, screws, glue, etc. are required, as the sensor is free-standing, which allows it to be placed anywhere without using any tools. The included stand allows you to place the sensor on a dresser, table, shelf, etc.
< /div> You have a guarantee of the correct operation of the sensor, because each copy of the EURA CD-45A2 carbon monoxide sensor is individually tested in a Polish laboratory, a special chamber for activating an optical and acoustic alarm signal caused by the presence of carbon monoxide in the atmosphere.
Where should a carbon monoxide sensor be installed?
The CD-45A2 sensor must be placed in an enclosed space where there is the greatest risk of carbon monoxide concentration hazards!
other rooms in the building.
The Cd-45A2 carbon monoxide sensor should be placed at head height, for example, in a bedroom it is approximately 0.7 m, and in a living room it can be approximately 1.5 m.8 m from the floor.
The dead zone is the area in each room where sensors should not be installed. This is the space settlement 20 cm from the ceiling.
Due to the lack of air movement, its insignificant or too intense (in the case of proximity to ventilation grills), the carbon monoxide sensor should not be placed in the dead zone. ps: //allegro2.eltrox.pl/zdjecia/27978/czujnik_czadu_eura_cd45a2_wolnostojcy_bateryjny_wyswietlacz_lcd_09bc7f9de5c45.jpg “alt”/div. 6 “>
Sensor launch:
Pull out the silicone protective test (stand)
Then separate the mounting base from the device body by sliding it out of the mounting hooks.
Insert two AA 1.5 V LR6 batteries into the device. BATTERIES INCLUDEDThe average lifespan of regular batteries is about 1 year. If alkaline batteries are used, the lifespan should be about 2 years.
Test the device by pressing the button on the case for a few seconds. When you hear irregular sounds from the device's speaker, you can release the button. The presence of a series of sounds from the speaker indicates that the device is working properly.
BATTERIES INCLUDEDThe average lifespan of regular batteries is about 1 year. If alkaline batteries are used, the lifespan should be about 2 years.
Test the device by pressing the button on the case for a few seconds. When you hear irregular sounds from the device's speaker, you can release the button. The presence of a series of sounds from the speaker indicates that the device is working properly.
BATTERIES INCLUDEDThe average lifespan of regular batteries is about 1 year. If alkaline batteries are used, the lifespan should be about 2 years.
Test the device by pressing the button on the case for a few seconds. When you hear irregular sounds from the device's speaker, you can release the button. The presence of a series of sounds from the speaker indicates that the device is working properly.
