GIRA blind drive 4x DC 24 V KNX 215400

KNX functions

• The ability to directly control the position of the curtains.
• Ability to directly control the position of the blind slat.
• Ability to set behavior if interrupted < parameter power supply movement, and separately

top position

• Central control of all blind outputs is possible.
• Feedback on the position of blinds or blind slats.
• Feedback messages can be delayed until bus power returns.
• Assignment of up to five different security functions (three wind alarms, one rain alarm function, can be a cyclic alarm, one blind output with frost position.
• Possible inclusion in scenes, parameterization of up to eight internal scenes per channel.
• Light scene storage function.
• The sun protection function is activated by a fixed and variable position of the blinds or blind slats.
• Extended sun protection with extensive control functions or manually.
• Possible blocking in the building. busbar.
• Active or passive (with the ability to read the object) cyclic feedback functions.
• Construction site operation mode: manual operation of outputs is possible without bus power supply, only with operating power supply.
• Under voltage DC 12 to 48 V.
• Independent control of four blind exits. row”>
  

  Technical data

  KNX environment:TP256

  Connectors

  – KNX: connection and branch terminals

  – Load: screw terminals

  Rated voltage: DC 12 to 48 V

  DC switching voltage: DC 12 to 48 V

  Dielectric constant current

  DC 2/2 V: 3 A

  Connection cross-section: max. 4 mm²