CARBON MONOXIDE SENSOR: carbon monoxide detector – Kidde K7CO
- K7CO carbon monoxide sensor is equipped with Kidde electrochemical sensorwhich guarantees 10 years of operation.
- Battery power allows install the detector in an optimal location room and provides excellent protection – even in the event of a power outage.
Kidde K7CO CO SENSOR — main features:
- Electrochemical technology — one of the most accurate electrochemical sensors in the world
- 40 % longer operating period compared to other sensors available on the market
- Loud alarm sound
- Test/Reset button for device control and operation
- Battery powered — protection is ensured even in the event of a power outage
- Possibility to mount on a wall or place the sensor on a flat surface
- Indication of malfunction and end of operating period
- Low supply voltage signal
- Additional LED indicator signals device malfunction and end of operating period
- Function that notifies when an alarm is activated within the last 14 days
- Easy installation and operation
- Certified for use in homes, caravans, campers and boats
- Small size, light weight, aesthetic and durable body
- Very low operating costs
- Design mark B – National certificate of constancy of performance, confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021
- BSI certificate of compliance with BS EN 50291-1:2018
- BSI certificate of compliance with BS EN 50291-2:2019
Kidde K7CO CARBON MONOXIDE DETECTOR – operation:
- Exceeding the permissible CO level is signaled optically (red LED light) and acoustically (loud, pulsating sound alarm with a power of 85 dB).
- Information on detecting CO concentrations exceeding 100 PPM The level is stored in the device's memory. Thanks to this, the user can check for himself whether carbon monoxide has been released in the room during his absence.
- The sensor has a test/reset button, which allows you to check the operation of the device and reset the alarm.
- The efficiency control system continuously monitors, among other things: the condition of the sensors, internal circuits and the battery.
- In case of malfunction or low battery charge, the yellow LED flashes and an audible warning signal is activated.
- In addition, the sensor is equipped with a function that allows you to quickly check the correct response of the sensor to the CO test gas.
Kidde K7CO CO SENSOR - shockproof, ideal for boats!
- Thanks to its special impact-resistant design, the detector is approved for use not only in houses and apartments,but also in caravans, campers and boats.
- After 10 years of operation, the sensor will remind you to replace the device.
BE SAFE! Choose a carbon monoxide detector with all the necessary and mandatory certificates!
- K7CO is marked with construction mark B, which confirms compliance with the Polish standard PN-EN 50291-1:2018+AC:2021 requirements for home carbon monoxide detectors.
- Tests were performed Fire Safety Scientific and Research Center – National Research Institute. Józef Tuliszkowski (CNBOP-PIB).
- Kidde K7CO carbon monoxide sensor is BSI certificate, which confirms compliance BS EN 50291-1:2018 standard requirements and issued by British Standards Institution.
- In addition K7CO the sensor has certificate of conformity with the standard BS EN 50291-2:2019 (PN-EN 50291-2:2020) requirements and allows the device to be used in caravans and boats. Compliance with the above standard was confirmed by an independent research body British Standards Institution.
Kidde K7CO CARBON MONOXIDE DETECTOR - Where is it best to install it?
- Install a Kidde K7CO carbon monoxide detector in every room, where is located fuel-consuming devices.
- Additional detectors should be installed in rooms where we spend a lot of time — e.g. in the living room, officeand in all bedrooms.
- This is especially recommended if people in these rooms may not hear the alarm because their location sensor is activated in another part of the building.
- NOTE: It is also worth placing one detector on each floor of the building and in each room through which the chimney passes!
Kidde K7CO CO2 SENSOR - detector specifications and technical data:
- Sensors:patented electrochemical CO sensor from KIDDE
- Alarm: optical – built-in red LED; acoustic – siren with sound intensity of approximately 85 dB at a distance of 3 m, 3.0 ~ 3.5 KHz
- End of service life alarm: optical – yellow LED flashes twice every 60 seconds; acoustic – double, short beep every 60 seconds
- Malfunction indication: short beep every 30 seconds and yellow LED flashing every 30 seconds or continuous beep
- Alarm activation memory: The red LED flashes every 60 seconds if the device has detected a CO concentration of 100 ppm or higher in the last 14 days.
- Test/Reset Button – Intended Use: for checking and operating the device; after pressing the button, the device performs a control test; to delete the alarm activation signal stored in the device's memory; in case of alarm activation, it allows you to reset it
- Maximum concentration button:no
- Sensor durability:10 years
- Display:no
- Assembly method: on the wall or as a freestanding unit, on a flat surface
- Housing:made of ABS plastic
- Additional features: simulation test that allows you to test the sensor using commercially available CO test gas
- The set additionally includes: batteries, mounting bracket, mounting pins, user manual
- Power supply: 2x 1.5 V, AA alkaline batteries (included)
- Battery discharge indicator: short beep every 60 seconds and yellow LED flashing every 60 seconds
- Operating conditions:temperature from -10 ~ 45°C; humidity up to 90% relative humidity, non-condensing
- Storage conditions:temperature from -20 ~ 60°C; humidity 5 ~95 % relative humidity, non-condensing
- Dimensions: 119mm x 72mm x 40mm
- Weight with batteries: 160g
- Certificates and approvals:building mark BBS EN50291-1:2018 - certification body BSIKM 738897, BS EN 50291-2:2019 - certification body BSI KM 738897CE
- EAN:047871313396
