NICE WINGO 3524 ERA FLOR set for double-leaf gates (max. driveway clearance: 7 m)
The set includes 2 pages.
WGK3524.8003 drives (self-locking for gates with leaf length up to 3.5 m)
- MC424LR10 control unit with built-in radio receiver
- Hermetic control unit housing
- 2 dual-channel remote controls with dynamic rolling code for ON2E attachment
Sli> release keys
- Manual unlocking
- Emergency power supply
- Settings memory
- Obstacle detection
- Automatic closing
- Waterproof
The NICE Wingo 3524 24V kit is designed for large swing gates with a leaf length of up to 3.5 m and a weight of up to 400 kg. The kit can be additionally supplemented with an antenna that increases the range of remote controls and elements that increase the safety of automation: a warning lamp and one or two photocell lines.

- Reliable and quiet: Thanks to the use of a patented layout of internal components and fewer moving parts
- Easy to install: After installing the actuator. m resistive strip kΩ,
- programmable pause time
- Partial opening of the gate (gate function)
- Slowdown when closing and soft start when opening.
- Possibility to operate an electric lock.
- In addition, thanks to PS124 (optional) the battery will open andin case of emergency. li>
- Thanks to a patented internal component system and fewer moving parts, it guarantees quiet operation and reliability.
- Equipped with a manual disconnection mechanism that allows you to conveniently disconnect the power supply in the event of an emergency failure or emergency function.
- amperometric obstacle detection system – used to detect possible obstacles that may occur during normal gate movement. Thanks to this function, when encountering an obstacle, the drive stops the gate and changes its direction of movement.
- smooth release function during closing and soft start – it consists of reducing the speed to avoid strong jerks when opening or closing the gate. Thanks to this, the gate operates smoothly and does not make noise during operation.
- phototest function – before each gate movement, the control unit automatically checks whether the photocells are working properly, and when everything is working properly, the gate is triggered.
- gate function, i.e. partial opening of the gate or opening of one wing – thank you, or the wing is not open and close completely.
- Self-locking drive – means that the gate mechanically locks after the engine stops. Thanks to this, there is no need for additional mechanical locking of the gate using a lock, nor is it possible to open it manually.
- Control unit cooperating with actuators “>
Control unit MC424LR10
The MC424LR10 control unit is designed for the automation of swing gates using Nice Wingo 24V actuators. The rich set of functions and parameters of the control panel allows you to meet the requirements of most users:
- Built-in multi-system radio receiver for remote controls
- Encoding support: FLO, FLOR, SMILO and OPERA (simultaneous)
- Possibility to expand the management programwith radio panel or LUCLI> li>
- Self-diagnosis of signal lamp errors
- Two-level programming stage
- Possibility to connect O-VIEW programmer via IBT4N interface
- Integrated current transformer
- Memory for PS124 battery with remote control
- Memory up to
for surgery classColi04 Solemyo system (solar panels)
NICE ON2E ERA ONE OPERA two-channel remote control
- Single-family remote controls are modern, secure devices with multiple features that make home automation management easier.
- Each ONE remote control has its own identification code, thanks to which ONE Remote controls can be remotely copied from the remote control without being at the installation location of the device.
- Series One remote controls are compatible with other Nice remote controls, for example, Nice for remote controls such as F and elegant One remote control can be used as a key ring or mounted on the car dashboard thanks to the holder that is included as standard.
Included accessories
TECHNICAL SPECIFICATION
- Power supply/motor power supply [V]: 230/24consumes 0 motor: current consumption of one motor [A]: 2
- Protection class [IP]: 44
- Nominal linear speed [m/s]: 0,012
- Operating temperature [°C]: -20 – +50
- W intensity [cycles/day]: 30
- Weight of one actuator [kg]: 6
- Maximum wing weight [kg]: 400
- Maximum wing length [m]: 3,5
- 5.9 mm Stroke [mm]: 470
- Maximum pulling force [N]: 1500
- Message type: 1,2
- Linear speed without load [m/s]: 0,016
divv class=”li>
ATTENTION!
Gate drives, like all goods that NOT ends with a plug, and therefore requires changes to the electrical installation of the facility during their installation - according to the law, they are intended exclusively for installation by qualified installer with appropriate qualifications
.-20 – +50
ATTENTION!
Gate drives, like all products that NOT POSSIBLE are closed with a plug, and therefore, when installing them, changes must be made to the building's electrical installation - according to the law, only qualified
installer >
-20 – +50
ATTENTION!
Gate drives, like all products that NOT POSSIBLE are closed with a plug, and therefore when installing them, changes must be made to the building's electrical installation - according to the law, only allowed
for the installer.b> >