Rotenso Airmi Split heat pump AIS80X13i (indoor unit)

v class=”row”>

load=”blue” altd.

Rotenso airmi split 8 kW kit includes:

– indoor unit AIS80X13i

– outdoor unit: AISW80X1O (white housing) ORSB80X housing)

– wired controller

– Hot water tank sensor

– plate heat exchanger

– flow sensor

– expansion tank

– pressure gauge

– water pump

– safety valve

– air vent valve

– Y-type water filter

=”

single-phase pump with a heating capacity of 7.90 kW (A7/W35) and a high energy efficiency class of A+++ (for a flow temperature of 35°) and A++ (for a flow temperature of 55°). The COP parameter for A7/W35 is 4.52. The pump allows you to control two heating zones.

This ensures high heating efficiency down to outdoor temperatures of -25°C.

The maximum available water temperature in heating mode is: 65°C and in hot water mode: 60°C.

The pump has an inverter. The refrigerant is R32.

The Rotenso Airmi Split heat pump is equipped with a 9 kW auxiliary heater with modulated power (3 kW + 3 kW + 3 kW). In emergency situations or at temperatures below the bivalent point, it is recommended to use additional heaters for the pump when preparing central heating or hot water. It is worth knowing that the use of heaters has a positive effect on the durability and reliability of the heat pump.

To ensure trouble-free operation at temperatures below 0°C, the pump is equipped with a drip tray heater, the operation of which protects against condensation freezing and icing of the outdoor unit, thus preventing possible damage to the fan and the second element of the heat pump. which heats the compressor oil at temperatures below 0°, preparing the device for trouble-free start-up in adverse weather conditions.

This technical solution guarantees smooth operation and extends the service life of the compressor – the heart of the heat pump.

The Rotenso Airmi Split pump can be controlled from a mobile application (Tuya Smart), as well as with a built-in wired room sensor. p>