Rotenso Windmi Monoblock WIM60X1 heat pump (outdoor unit)
The WIM60X1 device consists of:
– outdoor unit
– wired controller,
– control cable
– hot water tank sensor,
– plate exchanges,
-
– tank flow sensor, –
-
. water,
– safety valve,
– air vent valve
– Y-type water filter
Rotenso WINDMI WIM60X1 is a monoblock WINDMI WIM60X1 is a monoblock, 6 kW heat pump with single-phase power. 0 kW highly efficient unit with high energy efficiency class A+++ (for supply temperature 35°) and A++ (for supply temperature 55°), with a SCOP index of 4.75 (for supply temperature 35°C).
The outlet water temperature in heating mode is available in the range of 20°C to 62°C and in hot water mode in the range of 40°C to 62°C.
The pump is prepared for operation in extreme weather conditions down to -25°C outdoor temperature. To ensure trouble-free operation at temperatures below 0°C, the pump is equipped with a drip tray heater, which protects against condensation freezing and icing of the outdoor unit, thus preventing possible damage to the heat pump fan and heat exchanger. The second important element of the pump equipment is the compressor crankcase heater, which heats the compressor oil at temperatures below 0°C, preparing the device for trouble-free start-up in adverse weather conditions. This technical solution guarantees trouble-free operation and extends the service life of the compressor – the heart of the heat pump.
The Rotenso Windmi WIM60X1 heat pump is equipped with a 3 kW auxiliary heater. In emergency situations or at very low temperatures, for economical operation of the heat pump, it is advisable to use heaters that support the preparation of hot central heating water. It is worth knowing that the use of heaters has a positive effect on the durability and reliability of the heat pump.
The Rotenso Windmi heat pump is a device that is easy to install, maintain and use continuously. The two-door design of the pump housing provides easy access to all its components. The single-fan design, dual-rotary DC compressor and optimized piping design significantly influenced the quiet operation of the pump.
The Rotenso Windmi pump can be controlled from a mobile application, as well as with a modern wired controller.
The pumps have a 5-year warranty. The buyer is provided with professional service and warranty care. The manufacturer provides free pump start-up by an authorized service center, access to a nationwide service network, and fast service response time.
*Terms and conditions for the 5-year warranty on Rotenso heat pumps can be found in the downloads section.
Additional information
| Svars | 125,0000 kg |
|---|
Related Products
