SATEL KNX interface KNX-USB
The KNX-USB interface enables communication between the KNX bus and a computer to program and monitor bus devices using the ETS program.
The device can also operate in bus bus logging mode, in which a KN event history bus is generated, in which the event history X. non-volatile (up to 350,000 events) is stored.
In bus recording mode, the interface does not support communication with the ETS program.
Features
- communication from the KN or X bus connection to the computer's USB port or from a power bank
- Galvanic isolation of KNX system and computer
- data transfer between the interface and the computer in USB 2.0 standard
- LED for displaying device status
- easy connection and use
| Case dimensions | 67 x 34 x 21 [mm] | |
| Operating temperature range > | -5°trtd> 08 [g] | |
| IP protection class | IP20 | |
| Storage/transport temperature range | -25°C…+70°C | |
| KNX bus voltage | 20…30 [VDC] | |
| Current consumption from KNX bus | < 20 [mA] | |
| USB voltage | 5 [VDC] | |
| Current consumption from USB | < 30 [mA] | |
| Maximum power consumption from USB | 0.3 [W] | |
| USB socket type | mini USB type B | |
| Maximum power consumption from KNX bus | 0.6 [W] | |
| Maximum cable length USB | 5 [m] |
