Pulsar relay module AWZ510

Pulsar AWZ510 RELAY MODULE — PURPOSE:

The PU1 relay module (AWZ510) is designed for use in low-voltage installations. It is used for control and status signaling, for example, in alarm systems, access control. It can be used to control devices with high power consumption using the OC outputs of alarm systems. In addition, it provides galvanic isolation of signal and power sources from the module outputs. Its relay circuit has a series fuse (C, NO, NC).

Pulsar AWZ510 RELAY MODULE — ASSEMBLY:

The module is equipped with a flat wall power supply unit (etc.) and holes for screwing the strip to the surface.

Pulsar AWZ510 RELAY MODULE - TECHNICAL SPECIFICATIONS:

• Relay coil voltage (DC 1/16 %) >Coil control current: 33mA@12VDC
• Coil resistance: 360 OHM (-/+10%)
• Coil power: 400mW
• Number of relays: 1
• Relay: contact / voltage 3 50 VAC max.
• Relay contact current: 1A max.
• Relay contacts: C/NC/NO (wires Ø2.05mm; AWG 24-12)
• On/off time: 15 ms/8 ms: Environmental conditions >< 0ms,

0. b> ÷ 40°C

• Hull: “open frame” construction, IP00
• Dimensions: W=50, L=43, H=20[mm, +/-2]
• Net/gross weight: 0.025/b>:
• Declarations: CE
• Notes: wires to connectors; Ø 0.41÷1.63 (AWG 26-14), Ø 0.51÷2.05 (AWG 24-12) — relay contacts